I'm writing a really simple csv file reader/editor, using, of course, wxGrid.
I'm finding that Grid.AutoSize is not working. It seems that is uses the GridCellRenderer BestSize to figure out how to size things. My GridTableBase handles only strings, and I've defined:
def GetTypeName(self, row, col):
"""Return the name of the data type of the value in the cell"""
return wx.grid.GRID_VALUE_STRING
So it should be using the built-in string renderer. However, I'm getting all teh cells shrunk to skinny when I call AutoSize.
any ideas?
-Chris
I've enclosed the app -- not quite as small as it should be, but...
Emergency Response Division
NOAA/NOS/OR&R (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
I'd probably try AutoSizeColumns, maybe with the setAsMin=True keyword
argument passed in. Reading Robin's book, it sounds like AutoSize()
itself should work (pg 439), so I'm wondering if it's getting called
before the values are set in the cells. Maybe try calling it with
wx.CallAfter()?
···
On Mar 2, 7:19 pm, Christopher Barker <Chris.Bar...@noaa.gov> wrote:
HI folks,
I'm writing a really simple csv file reader/editor, using, of course,
wxGrid.
I'm finding that Grid.AutoSize is not working. It seems that is uses the
GridCellRenderer BestSize to figure out how to size things. My
GridTableBase handles only strings, and I've defined:
def GetTypeName\(self, row, col\):
"""Return the name of the data type of the value in the cell"""
return wx\.grid\.GRID\_VALUE\_STRING
So it should be using the built-in string renderer. However, I'm getting
all teh cells shrunk to skinny when I call AutoSize.
any ideas?
-Chris
I've enclosed the app -- not quite as small as it should be, but...
I'm writing a really simple csv file reader/editor, using, of course,
wxGrid.
I'm finding that Grid.AutoSize is not working. It seems that is uses the
GridCellRenderer BestSize to figure out how to size things. My
GridTableBase handles only strings, and I've defined:
def GetTypeName(self, row, col):
"""Return the name of the data type of the value in the cell"""
return wx.grid.GRID_VALUE_STRING
So it should be using the built-in string renderer. However, I'm getting
all teh cells shrunk to skinny when I call AutoSize.
I'd probably try AutoSizeColumns, maybe with the setAsMin=True keyword
argument passed in. Reading Robin's book, it sounds like AutoSize()
itself should work (pg 439), so I'm wondering if it's getting called
before the values are set in the cells. Maybe try calling it with
wx.CallAfter()?
I don't think any of that is it. In fact, if you double click on the bar between the column headers, you get the same thing -- the column resizes to fit the header. That is presumably calling AutoSizeColumn(), and the contents have certainly been rendered.
give the sample I posted a try if you can (note: I've only tested on OS-X)
I'll keep poking at it..
-Chris
···
--
Christopher Barker, Ph.D.
Oceanographer
Emergency Response Division
NOAA/NOS/OR&R (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
Well, I poked at it and tried moving the AutoSize() call itself to right after you instantiate it:
self.grid = CSVGrid(self)
self.grid.AutoSize()
I didn’t call ForceRefresh(). This seemed to work better than the way you were doing it. See my attached screenshots. I’m on Windows XP with Python 2.5 and wxPython 2.8.10.1
I’m writing a really simple csv file reader/editor, using, of course,
wxGrid.
I’m finding that Grid.AutoSize is not working. It seems that is uses the
GridCellRenderer BestSize to figure out how to size things. My
GridTableBase handles only strings, and I’ve defined:
def GetTypeName(self, row, col):
"""Return the name of the data type of the value in the cell"""
return wx.grid.GRID_VALUE_STRING
So it should be using the built-in string renderer. However, I’m getting
all teh cells shrunk to skinny when I call AutoSize.
I’d probably try AutoSizeColumns, maybe with the setAsMin=True keyword
argument passed in. Reading Robin’s book, it sounds like AutoSize()
itself should work (pg 439), so I’m wondering if it’s getting called
before the values are set in the cells. Maybe try calling it with
wx.CallAfter()?
I don’t think any of that is it. In fact, if you double click on the bar between the column headers, you get the same thing – the column resizes to fit the header. That is presumably calling AutoSizeColumn(), and the contents have certainly been rendered.
give the sample I posted a try if you can (note: I’ve only tested on OS-X)
Well, I poked at it and tried moving the AutoSize() call itself to right after you instantiate it:
self.grid = CSVGrid(self)
self.grid.AutoSize()
I didn't call ForceRefresh().
That was there for when the user loads a new file -- though I'm thinking I should probably just create a new grid when that happens.
This seemed to work better than the way you were doing it. See my attached screenshots.
> I'm on Windows XP with
Python 2.5 and wxPython 2.8.10.1
well, for me, it looks the same either way when loaded. But when I double click on the column header dividers, it doesn't auto-size right. What happens for you when you do that?
Thanks,
-Chris
···
--
Christopher Barker, Ph.D.
Oceanographer
Emergency Response Division
NOAA/NOS/OR&R (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
Well, I poked at it and tried moving the AutoSize() call itself to right after you instantiate it:
self.grid = CSVGrid(self)
self.grid.AutoSize()
I didn’t call ForceRefresh().
That was there for when the user loads a new file – though I’m thinking I should probably just create a new grid when that happens.
This seemed to work better than the way you were doing it. See my attached screenshots.
I’m on Windows XP with
Python 2.5 and wxPython 2.8.10.1
well, for me, it looks the same either way when loaded. But when I double click on the column header dividers, it doesn’t auto-size right. What happens for you when you do that?
Thanks,
-Chris
–
Christopher Barker, Ph.D.
Oceanographer
When I double-click the column divider, it shrinks the column down to match the column label’s size. I thought I remembered seeing some kind of mixin for this sort of thing, but I can’t find it right now. Hopefully Robin will have some insight.
I added a call to AutoSize to another event handler since I don't have a cvs file handy, and it seems to be working fine for me. I noticed that when you load the new file you are not doing anything to adjust the grid to the new dimensions of the table, so if your new csv file has a different number of rows/cols then perhaps that is the source of the problem with AutoSize. Basically you need to send table messages to the grid to tell it what the new dimensions are. There is some info about this in the wiki: UpdatingGridData - wxPyWiki
···
On 3/2/10 5:19 PM, Christopher Barker wrote:
HI folks,
I'm writing a really simple csv file reader/editor, using, of course,
wxGrid.
I'm finding that Grid.AutoSize is not working. It seems that is uses the
GridCellRenderer BestSize to figure out how to size things. My
GridTableBase handles only strings, and I've defined:
def GetTypeName(self, row, col):
"""Return the name of the data type of the value in the cell"""
return wx.grid.GRID_VALUE_STRING
So it should be using the built-in string renderer. However, I'm getting
all teh cells shrunk to skinny when I call AutoSize.
I'm finding that Grid.AutoSize is not working. It seems that is uses the
GridCellRenderer BestSize to figure out how to size things. My
GridTableBase handles only strings, and I've defined:
def GetTypeName(self, row, col):
"""Return the name of the data type of the value in the cell"""
return wx.grid.GRID_VALUE_STRING
So it should be using the built-in string renderer. However, I'm getting
all teh cells shrunk to skinny when I call AutoSize.
I added a call to AutoSize to another event handler since I don't have a cvs file handy, and it seems to be working fine for me.
OK, I added a button that calls AutoSize, and it does indeed work.
However, when I double click on the divider between two columns -- for me, it shrinks the column down too small. That's not what I expect, but maybe it's doing what it is supposed to do.
I noticed that when you load the new file you are not doing anything to adjust the grid to the new dimensions of the table,
yes -- I hadn't got to that yet. I'm actually thinking that I might just make a new grid when I load a new file -- that would set me up for multiple documents at once, anyway.
so if your new csv file has a different number of rows/cols then perhaps that is the source of the problem with AutoSize.
hmm -- I'll check that out.
Basically you need to send table messages to the grid to tell it what the new dimensions are. There is some info about this in the wiki: UpdatingGridData - wxPyWiki
Thanks, I'll take a look at that.
I've enclosed the
-Chris
···
On 3/2/10 5:19 PM, Christopher Barker wrote:
--
Christopher Barker, Ph.D.
Oceanographer
Emergency Response Division
NOAA/NOS/OR&R (206) 526-6959 voice
7600 Sand Point Way NE (206) 526-6329 fax
Seattle, WA 98115 (206) 526-6317 main reception
However, when I double click on the divider between two columns -- for
me, it shrinks the column down too small. That's not what I expect, but
maybe it's doing what it is supposed to do.
